What is the difference between semi-custom and fully custom cabinets?

Doors hang crooked when cabinets are not level or when hinges are not adjusted after installation. The installer uses shims to level each unit and tweaks hinge screws so doors align at the top and bottom.

How are cabinets attached to walls?

You screw upper cabinets directly into wall studs using screws long enough to penetrate at least two inches. Lower cabinets are fastened through the back rail and sometimes screwed together at the face frames for added stability.

Why do some cabinets have filler strips?

Filler strips close gaps between cabinets and walls or allow doors and drawers to open fully without hitting appliances or adjacent cabinets. They match the cabinet finish and are scribed to fit uneven walls.

When should countertops be installed relative to cabinets?

You install cabinets first so the countertop fabricator can template directly on top of the assembled units. This ensures the countertop fits precisely and overhangs evenly on all sides.

How do installers handle uneven floors during cabinet installation?

They use shims under the toe kick to level lower cabinets and scribe filler strips to match floor slopes. Once the cabinets are level, they trim the shims and cover them with a matching toe kick board.

Cabinet Installation | Tile Superstore & More

When you order cabinets for a kitchen or bathroom remodel in Rochester and need to ensure the units fit your wall studs, plumbing locations, and appliance dimensions, cabinet installation coordination prevents costly mistakes like cabinets that block outlets or doors that do not clear each other when opened. You work with professionals who measure twice, account for floor slope, and plan for crown molding or filler strips before ordering.

TILE SUPERSTORE & MORE helps you confirm measurements, select hardware, and coordinate installation timing so your cabinets align with countertop fabrication and flooring schedules. The team works with installers who handle both remodels and new builds, and they guide you through decisions about cabinet depth, door swing direction, and whether your layout benefits from open shelving or closed storage.

Visit the Rochester showroom to review cabinet styles and discuss your installation timeline.

You start by having your space measured by an installer who identifies stud locations, marks plumbing and electrical rough-ins, and checks walls for plumb and level in your Rochester home. The measurements account for toe kick height, countertop overhang, and appliance clearances so cabinets do not interfere with refrigerator doors or dishwasher installation. You review a layout drawing that shows cabinet placement, filler strip locations, and hardware orientation.

After installation, you open cabinet doors and drawers without them hitting each other, and shelves sit level without tilting forward. The units are fastened securely to studs, and gaps between cabinets and walls are filled with matching strips that look intentional rather than like mistakes.

The coordination process also includes confirming delivery timing so cabinets arrive after flooring is installed but before countertops are templated. If your project includes removing old cabinets, the installer disposes of them and patches drywall as needed. You receive guidance on whether to install hardware before or after the cabinets are mounted and how to protect finished surfaces during the rest of your remodel.

What is the difference between semi-custom and fully custom cabinets?
Doors hang crooked when cabinets are not level or when hinges are not adjusted after installation. The installer uses shims to level each unit and tweaks hinge screws so doors align at the top and bottom.
How are cabinets attached to walls?
You screw upper cabinets directly into wall studs using screws long enough to penetrate at least two inches. Lower cabinets are fastened through the back rail and sometimes screwed together at the face frames for added stability.
Why do some cabinets have filler strips?
Filler strips close gaps between cabinets and walls or allow doors and drawers to open fully without hitting appliances or adjacent cabinets. They match the cabinet finish and are scribed to fit uneven walls.
When should countertops be installed relative to cabinets?
You install cabinets first so the countertop fabricator can template directly on top of the assembled units. This ensures the countertop fits precisely and overhangs evenly on all sides.
How do installers handle uneven floors during cabinet installation?
They use shims under the toe kick to level lower cabinets and scribe filler strips to match floor slopes. Once the cabinets are level, they trim the shims and cover them with a matching toe kick board.