What should I bring to a DIY design consultation?

Bring your room measurements, photos of the area, and notes on your skill level and timeline. If you have existing materials or samples, bring those as well so the staff can coordinate finishes.

How do I know how much tile to order?

The staff calculates square footage based on your measurements and adds a waste percentage to account for cuts and breakage. They recommend ordering extra tiles in case you need replacements later.

What tools do I need for a tile installation?

You typically need a tile cutter or wet saw, trowels for adhesive, spacers, a grout float, a sponge, and a level. The showroom staff can suggest specific tools based on the tile type and layout you choose.

What if my measurements are off after I start demolition?

Remeasure the space and return to the showroom to adjust your material order if needed. It is easier to correct quantities before installation begins than to patch gaps or remove excess tiles later.

Can I get help if I run into problems during installation?

Yes, you can call or visit the showroom with questions during your project. If the issue requires on-site help, the staff can recommend local contractors who may be available for consultation or partial installations.

Design Support for DIY Projects | Tile Superstore & More

You have the tools and the time, but you are not sure if the subway tile you like will work with your floor layout or whether the grout color will make the backsplash look busy. Design support for DIY projects in Rochester helps you choose materials, plan layouts, and avoid mistakes that lead to wasted product or redone work. TILE SUPERSTORE & MORE provides showroom-based guidance so homeowners in Rochester can move forward with confidence on projects they are handling themselves.

During your visit, you discuss your project scope, measurements, and skill level with a staff member who walks you through material options and installation considerations. They explain which tiles require specific underlayment, how to calculate waste percentage, and which adhesive or grout works best for your surface. You leave with a clear product list, layout suggestions, and an understanding of the steps involved in your installation. This approach is ideal for hands-on remodelers who want expert input without hiring a contractor.

If you are managing your own remodel in Rochester and need help selecting materials or planning a layout, stop by the showroom to review your project details.<

You bring your room measurements and photos to the Rochester showroom, and the staff helps you calculate how many tiles, how much adhesive, and how much grout you need. They show you sample layouts on a board so you can see how different tile sizes and patterns affect the spacing and grout lines. They explain which tools are necessary for cutting, leveling, and sealing, and they point out common errors such as undersized expansion gaps or mismatched tile thickness.

After the consultation, you will know which materials fit your project and how to prepare your subfloor or wall surface. You will understand the curing time for adhesive and grout, and you will have a list of supplies organized by installation phase. Your layout will account for doorways, fixtures, and corners, reducing the chance of awkward cuts or uneven rows. You will also know when to stop and ask for help if conditions change during installation.

Design support is available during showroom hours and focuses on material selection and layout planning rather than on-site assistance. If your project involves structural changes or requires permits, you are responsible for those steps. The showroom can recommend local contractors if you decide partway through that professional installation is a better fit.

What should I bring to a DIY design consultation?
Bring your room measurements, photos of the area, and notes on your skill level and timeline. If you have existing materials or samples, bring those as well so the staff can coordinate finishes.
How do I know how much tile to order?
The staff calculates square footage based on your measurements and adds a waste percentage to account for cuts and breakage. They recommend ordering extra tiles in case you need replacements later.
What tools do I need for a tile installation?
You typically need a tile cutter or wet saw, trowels for adhesive, spacers, a grout float, a sponge, and a level. The showroom staff can suggest specific tools based on the tile type and layout you choose.
What if my measurements are off after I start demolition?
Remeasure the space and return to the showroom to adjust your material order if needed. It is easier to correct quantities before installation begins than to patch gaps or remove excess tiles later.
Can I get help if I run into problems during installation?
Yes, you can call or visit the showroom with questions during your project. If the issue requires on-site help, the staff can recommend local contractors who may be available for consultation or partial installations.